Mold Inspection near Dallas, Texas

Historical Air Quality Data for Dallas, Texas

Texas Administrative Code - Mold Assessment and Remediation Rules

Title 25 - Part 1 - Chapter 295 - Subchapter J

1. Licensing or registration requirement. A person must be licensed or registered in compliance with this subchapter to engage in mold assessment or mold remediation unless specifically exempted under §295.303 of this title (relating to Exceptions and Exemptions).
2. Accreditation requirement. A person must be accredited as a mold training provider in compliance with this subchapter to offer mold training for fulfillment of specific training requirements for licensing under this subchapter.
3. Age requirement. Each individual applying to be licensed or registered under this subchapter must be at least 18 years old at the time of application.
4. Office requirement. A person licensed under this subchapter must maintain an office in Texas. An individual employed by a person licensed under this subchapter is considered to maintain an office in Texas through that employer.
5. Training requirement.
   1. An applicant for an initial license under §295.311 of this title (relating to Mold Assessment Technician: Licensing Requirements), §295.312 of this title (relating to Mold Assessment Consultant: Licensing Requirements), or §295.315 of this title (relating to Mold Remediation Contractor: Licensing Requirements) must successfully complete an initial training course offered by a department-accredited training provider in that area of licensure and receive a course-completion certificate before applying for the license.
   2. An applicant for renewal of a license listed under paragraph (1) of this subsection must successfully complete a refresher training course offered by a department-accredited training provider in the area of licensure for which renewal is sought and receive a course-completion certificate before applying for the renewal. The applicant must successfully complete the refresher course no later than 24 months after successful completion of the previous course.
   3. An applicant for an initial or renewal registration under §295.314 of this title (relating to Mold Remediation Worker: Registration Requirements) must successfully complete a training course as described under §295.320(d) and (f) of this title (relating to Training: Required Mold Training Courses) and receive a course-completion certificate before applying for the registration. If a refresher course is required, the applicant must successfully complete the refresher course no later than 24 months after successful completion of the previous course.
6. Examination requirement. In accordance with §295.310 of this title (relating to Licensing: State Licensing Examination), an applicant for an initial license under §§295.311, 295.312, or 295.315 of this title must pass the state licensing examination in that area of licensure with a score of at least 70% correct before applying for the license. All applicants must pass the state examination within six months of completing any training course required under subsection (e)(1) of this section in three or fewer attempts or must successfully complete a new initial training course before re-taking the state examination.
7. Applications. Each application for a credential or approval must provide all required information. An applicant shall indicate that a question does not apply by answering "not applicable" or "N/A". Applicants must submit complete applications, including all supporting documents, for each credential or approval sought.
   1. An applicant for an initial license under §§295.311, 295.312, or 295.315 of this title must submit the complete application to the department within six months of passing the required state licensing examination, as evidenced by a postmark or shipping documents, or must successfully complete a new initial training course, receive a new training certificate, and pass a new state examination before submitting a new initial license application.
   2. An applicant for an initial or renewal registration under §295.314 of this title must submit the complete application to the department within ten calendar days (not working days) of successfully completing the required training course, as evidenced by a postmark or shipping paperwork.
   3. An applicant for a renewal of a license listed under paragraph (1) of this subsection must successfully complete a required refresher training course and receive a course-completion certificate before applying for renewal. The applicant must complete the refresher course no later than 24 months after completion of the previous course.
8. Term and expiration.
   1. All credentials issued on or after January 1, 2006, are valid for two years and expire on the second anniversary of the effective date.
   2. Fees commensurate with a two-year credential must be included with any application for a credential that will expire on the second anniversary of its effective date.
   3. A credential holder is in violation of this subchapter if the holder practices with lapsed qualifications.
9. Condition of issuance. No credential, identification (ID) card, or approval issued under this subchapter shall be sold, assigned, or transferred. ID cards issued by the department must be present at the worksite any time an individual is engaged in mold-related activities. The department retains the right to confiscate and revoke any credential, ID card, or approval that has been altered.
10. Credentialed persons other than individuals. A mold assessment company, mold remediation company, mold analysis laboratory, or mold training provider that has been issued a credential under this subchapter:
    1. shall designate one or more individuals as responsible persons. The credentialed person must notify the department in writing of any additions or deletions of responsible persons within 10 days of such occurrences;
    2. shall not transfer that credential to any other person, including to any company that has bought the credentialed entity. The credentialed entity must apply for a new credential within 60 days of being bought; and
    3. must submit to the department a name-change application and a processing fee of $20 within 60 days of any change.

EPA Awards $15,000 to the Texas Agricultural Extension Service

Release date: 10/16/2009

Contact Information: Dave Bary at 214-665-2200

(Dallas, Texas – October 16, 2009) The Environmental Protection Agency (EPA) has awarded $15,000 to the Texas Agricultural Extension Service. The funds will be used to educate parents and childcare providers on reducing children’s exposures to lead hazards and managing indoor asthma triggers such as environmental tobacco smoke, chemicals and indoor contaminants, mold, dust mites, pet dander, and cockroaches.

Additional information on EPA grants: http://www.epa.gov/region6/gandf/index.htm

More about activities in EPA Region 6: http://www.epa.gov/region6

EPA audio file is available at http://www.epa.gov/region6/6xa/podcast/oct2009.html

Thank you for visiting our directory of Dallas Mold Inspection Experts powered by Environix.

Below is a list of frequently asked questions our mold experts often receive.

What type of services are typically offered by a mold inspection and mold testing company in Dallas?

A professional inspector in Duluth will typically offer the following services: mold Inspection, black mold inspection, mold detection, toxic mold testing, moisture intrusion detection (Leak Detection), pre-purchase inspection for real estate transactions, allergen screening for dust mites, pollen, pet dander, indoor air quality testing, (IAQ) Dallas, Texas.

Where is Mold Typically Found in Dallas area homes?

Mold growth can occur anywhere the conditions are correct, however certain areas are much more common. These include the crawlspace, attic, bathroom and near plumbing fixtures. Crawlspace mold damage often occurs during new construction or in warm environments using air conditioning. Attic mold damage is common in cooler climates and occurs when warm air from within the home condenses on the cold surface of the attic sheathing. Bathroom mold is very common, though often is more of an aesthetic problem than a health issue. Plumbing fixtures, however, can be a source of major mold problems, and if left unattended, often wood rot as well. Carpet mold is less common, however carpeting can often harbor old deactivated mold spores for many months after the source of the mold growth has been addressed.

Dallas environmental services are a key part in keeping your home safe. It is essential to find a qualified, certified toxic mold testing service to check your living conditions. Environix can help you find this qualified professional.

What is involved in the Mold Inspection & Mold Testing process?

A thorough mold inspection typically involves two main components, a visual inspection and sampling. The visual inspection focuses on identifying the extent of the visible mold growth and the conditions conducive to mold growth. This portion of the inspection often entails moisture meter testing, thermal imagine, humidity testing, CO2 and CO testing. Depending upon the scope of the inspection the process is either limited to a specific portion of the building or encompasses the entire property. Visual inspection and air sampling will identify problem areas that may be adversely affecting your Indoor Air Quality. Learn more about the inspection process.

Dallas, Texas Mold Experts

We offer an extensive array of indoor air quality (IAQ) professionals to suite your needs. These include building inspectors, waterproofing contractors, mold inspectors, hazardous materials managers, industrial hygienists and drainage contractors.

Symptoms of Mold Exposure in Dallas

The primary health effect of exposure to mold is through an allergic response. Asthma, allergies, and sinus infections can all result from exposure to mold spores. It is important to remember that mold spores are ubiquitous and occur naturally in the outside air. Much like pollen and other allergens, these reactions are possible in sensitive individuals even at levels found in the outside air. The goal of indoor air quality testing, therefore, is to determine if the mold spore counts in your home are elevated beyond the levels normally encountered in the outside air.

Respiratory infections are also possible, though typically only occur in susceptible individuals with compromised immune systems. These people are often confined to hospital clean rooms. The toxic effects of mold growth are far less understood. Scientists are unclear whether an individual can receive sufficient exposure to mold growing indoors to cause the toxic effects.

Learn more about the health effects of mold.

What should I look for in a Dallas mold testing and inspection company?

Before hiring any mold testing and inspection company, always ask the following questions:

1.) Are they certified in mold testing and mold inspection?

2.) Do they have three recent references from local, Dallas area customers?

3.) Are they licensed and bonded for mold testing in Dallas?

4.) Are they insured specifically for mold testing in Dallas?

Your Dallas, Texas mold testing and inspection experts are a key part in keeping your home safe. Environix can help you find this qualified professional. This Dallas black mold inspector will check air quality, look for lead paint or toxic black mold, and check drinking water and septic system issues.

Local News Results for Mold Inspection Dallas:

Mold is not only unsightly, but it can pose a serious health hazard. And it could be growing in your home right now.

Discovering mold

Mold is an all-natural substance found throughout nature. Mold spores are microscopic and can be found in the dust that forms indoors, and it's impossible to keep them from invading a home. However, it is possible to prevent the conditions that help mold proliferate into a problem.

In order to grow, mold only needs a few easily achieved conditions: moisture and a food source. Food can be just about any material on which mold can grow, be it furniture, walls or floors. Mold prefers temperatures around 75 F and humidity levels of 70 percent. Generally these are the ideal conditions in a home.

Health implications

Health effects from mold can vary from person to person. Some individuals may experience coughing, wheezing, nasal and throat conditions as a result of mold in the home. Those with asthma or other breathing difficulties may find their breathing issues worsen. People with compromised immune systems may experience serious fungal respiratory infections. Severe cases may even require hospitalization.

Keeping a home mold-free

Due to the far-reaching nature of mold, you must be diligent when inspecting for mold indoors. Because moisture and warmth are key contributors to mold growth, eliminating the ideal environment is essential to keeping mold under control. read more.