Mold Removal & Remediation near Dallas, Texas

Texas Administrative Code - Mold Remediation Contractors

Rule 295.315

(a) Licensing requirements. Unless exempted under §295.303 of this title (relating to Exceptions and Exemptions), an individual must be licensed as a mold remediation contractor to perform activities listed under subsection (b) of this section. A licensed mold remediation contractor who employs one or more individuals required to be licensed under this section or §295.314 of this title (relating to Mold Remediation Worker: Registration Requirements) must be separately licensed as a mold remediation company under §295.316 of this title (relating to Mold Remediation Company: Licensing Requirements), except that an individual licensed as a mold remediation contractor and doing business as a sole proprietorship is not required to be separately licensed under §295.316 of this title.

(b) Scope. An individual licensed under this section may perform mold remediation and supervise registered mold remediation workers performing mold remediation. In addition, a licensed mold remediation contractor is licensed to provide mold remediation services including:

  (1) preparing a mold remediation work plan providing instructions for the remediation efforts to be performed for a mold remediation project; and

  (2) conducting and interpreting the results of activities recommended in a work plan developed under paragraph (1) of this subsection, including any of the activities of a registered mold remediation worker under §295.314 of this title.

(c) Qualifications. In addition to the requirements for all applicants listed in §295.305 of this title (relating to Credentials: General Conditions) and §295.309 of this title (relating to Licensing: Insurance Requirements), an applicant must meet at least one of the following education and/or experience requirements:

  (1) a bachelor's degree from an accredited college or university with a major in a natural or physical science, engineering, architecture, building construction, or building sciences and at least one year of experience either in an allied field or as a general contractor in building construction;

  (2) at least 60 college credit hours with a grade of C or better in the natural sciences, physical sciences, environmental sciences, building sciences, or a field related to any of those sciences, and at least three years of experience in an allied field or as a general contractor in building construction;

  (3) a high school diploma or General Educational Development (GED) certificate, plus at least five years of experience in an allied field or as a general contractor in building construction; or

  (4) certification as an industrial hygienist, a professional engineer, a professional registered sanitarian, a certified safety professional, or a registered architect, with at least one year of experience either in an allied field or as a general contractor in building construction.

(d) Fees. The fees for a mold remediation contractor license are:

  (1) $500 for the license; and

  (2) a required Texas Online subscription and convenience fee.

(e) Applications and renewals. Applications shall be submitted as required by §295.308(a) of this title (relating to Credentials: Applications and Renewals). An applicant shall include the following in the application package:

  (1) if the application is for an initial license:

    (A) verifiable evidence that the applicant meets at least one of the qualifications under subsection (c)(1) of this section;

 

    (B) proof of compliance with the insurance requirement specified in §295.309 of this title;

    (C) a copy of a certificate of training indicating successful completion within the past twelve months of an initial training course offered by a department-accredited training provider as described in §295.320(e) of this title (relating to Training: Required Mold Training Courses); and

    (D) proof of successfully passing the state licensing examination with a score of at least 70% correct; or

  (2) if the application is for renewal of a license:

    (A) a copy of a certificate of training as described in §295.320(g) of this title, unless the applicant is exempt under §295.305(g)(3) of this title; and

    (B) proof of compliance with the insurance requirement specified in §295.309 of this title.

(f) Responsibilities. In addition to the requirements as listed in §295.306 of this title (relating to Credentials: General Responsibilities), the mold remediation contractor shall be responsible for:

  (1) supervising mold remediation workers as defined in §295.302(41) of this title (relating to Definitions);

  (2) accurately interpreting field notes, drawings, and reports relating to mold assessments;

  (3) advising clients about options for mold remediation;

  (4) complying with standards for preparing mold remediation work plans, as presented in training course materials or as required by the mold remediation company by whom the contractor is employed;

  (5) providing to a client a mold remediation work plan for the project before the mold remediation preparation work begins;

  (6) inquiring of the client whether any known or suspected hazardous materials, including lead-based paint and asbestos, are present in the project area;

  (7) signing and dating each mold remediation work plan that he/she prepares on the cover page. The cover page shall also include his/her license number and expiration date. He/she must also initial the work plan on every page that addresses the scope of work and on all drawings related to the remediation work;

  (8) submitting the required notification to the department, as described in §295.325 of this title (relating to Notifications), unless employed by a licensed mold remediation company;

  (9) ensuring that all individuals are provided with, fit tested for, and trained in the correct use of personal protection equipment required under §295.322(c) of this title (relating to Minimum Work Practices and Procedures for Mold Remediation);

  (10) if the mold remediation contractor is doing business as a sole proprietorship and is not required to be separately licensed as a mold remediation company under §295.316 of this title:

    (A) ensuring that the training, as described in §295.320 of this title (relating to Training: Required Mold Training Courses), and license of each employee who is required to be licensed under this subchapter is current

    (B) ensuring that the training, as described in §295.320 of this title, and registration of each registered employee is current;

    (C) ensuring that each unregistered employee who is required to be registered under this subchapter is provided the training required under §295.320(d) of this title before performing any mold remediation work;

    (D) complying with all requirements under §295.320(d) of this title if the contractor provides the training; and

    (E) ensuring that a previously unregistered employee who is provided training as specified in subparagraph (C) of this paragraph:

      (i) has applied to the department for registration before allowing that employee to perform any mold remediation work, except as provided under §295.314(e) of this title; and

      (ii) is registered before allowing that employee to perform any mold remediation work more than 30 days after the date of the training, in accordance with §295.314(e) of this title;

  (11) complying with recordkeeping responsibilities under §295.326 of this title (relating to Recordkeeping); and

  (12) providing to the property owner a completed Certificate of Mold Damage Remediation as specified under §295.327 of this title (relating to Photographs; Certificate of Mold Damage Remediation; Duty of Property Owner).

Services include:  Mold Removal Dallas – Mold Remediation Dallas, Texas – Mold Cleanup Dallas, Texas

Thank you for visiting our directory of Dallas Mold Experts powered by Environix. Below is a list of frequently asked questions our mold experts often receive.

What type of services are typically offered by a mold removal and remediation company in Dallas?

A professional mold remediation contractor in Dallas will typically offer the following services: mold removal, black mold cleanup and removal, mold remediation, toxic mold removal, mold basement removal, attic mold removal, bathroom mold cleanup and general house mold treatment.

What are the steps in a typical mold remediation project in Dallas area homes?

 1.) Identify the source. Without first identifying the conditions that encouraged mold growth, the remediation cannot succeed. Depending on the situation, the initial inspection is performed by an industrial hygienist, mold professional, home inspector or the remediation contractor themselves. In Dallas, Texas you will encounter all four sources.

2.) Identify the extent. Next, it is important to identify the extent of the mold growth and water damage. Often this involves the use of moisture meters, thermal imaging and other specialized equipment. Air quality sampling can also be employed to identify the extent of the contamination.

3.) Containment. During the mold removal and remediation process the mold spores will often become disturbed and aerosolized. This can lead to cross contamination and create a situation much worse than the original problem. Therefore, mold remediation contractors in Dallas, Texas use specialized techniques to contain the area. Often this involves the use of HEPA filtration, negative air machines and plastic sheeting.

4.) Removal. After containment is in place, the mold damaged materials are removed. Often this includes the removal of porous materials such as sheetrock, upholstered furniture, carpeting, insulation, etc.

5.) Decontamination. During a mold remediation project in Dallas, Texas there are often materials that do not require removal. Non-porous or semi-porous materials such as wood framing, metal, plastic and concrete can be cleaned in place. HEPA vacuuming, wire brushing, sanding and other cleaning techniques are utilized to remove all remaining mold spores from the contaminated area. Often, an antimicrobial solution is applied to the remaining materials as well.

6.) Clearance Testing. Upon completion of the mold remediation and removal project a final clearance inspection is performed. This can range from simply a visual inspection of the area to a full range of air quality and surface samples. Dallas, Texas mold removal contractors will often work with a third party inspection company to verify their work.

What should I look for in a mold remediation and mold removal contractor in Dallas, Texas?

 1.) Licensing. Ask the contractor if they have a valid Texas business license. Few states regulate the mold industry specifically, but all states require a general contractors license to perform mold remediation work.

2.)Insurance. Does the contractor have mold specific insurance coverage? Mold remediation insurance is expensive and often contractors simply have general construction insurance. This type of coverage will NOT cover any mold remediation or mold removal work.

3.)Experience. Ask the contractor how long they have been in business. Also, always ask for references from recent customers who hired the contractor for a similar project. Additionally, check the Texas Better Business Bureau.

4.) Pricing. Unfortunately the mold industry is plagued by a few very unscrupulous individuals. These companies charge exorbitant rates, often suggesting work that is completely unnecessary. If the price seems unusually high or the scope of work larger than what you expected, ask for a second opinion.

Check out our Mold Removal and Mold Remediation pages for more info.

Local News Results for Dallas Mold Removal:

Pinpoint the source of the smell that you can fix yourself

Q: One of our bathrooms has a musty and sometimes a sewer gas odor. I wipe out and dry the bathtub and sink, but the odor is still there. What is the source of the odor and how do I fix it? - Lauren G.A:

There are so many sources of water, air ducts and sewage in bathrooms, it often is very difficult to precisely identify the source of the odor without an actual inspection. Having said this, there definitely are some likely areas for you to check first. These also are the ones that you should be able to fix yourself.

A musty, moldy odor is usually caused by persistent dampness in a specific area or two in the bathroom. For mold and mildew to thrive in a bathroom, they need just moisture and some organic source for nutrition. This source can be flakes of dead skin from your body, soap residue, oils from conditioners, etc.

Since there also is a sewer gas odor at times, there may be a leaky wax ring under the toilet. This soft wax ring creates the seal between the toilet drain outlet and the sewage drain inlet pipe where the toilet is bolted down. If the toilet is slightly loose and you can rock it, this motion may deform the wax ring and cause a leak.  Read more.